Company Logo

Punctual pump maintenance thanks to Sulzer service network

11th February 2021
Complex maintenance project completed successfully and on time

A manufacturer within the German automotive sector has a modern combined heat and power plant that supplies its own facilities as well as large areas of the nearby town. A short lead time was therefore an important aspect when putting routine pump maintenance out to tender. Not only was Sulzer able to offer the earliest completion date, but it also met the deadline and to the full satisfaction of the customer – in spite of unforeseen challenges during the performance of the project.

Ten years ago, during the comprehensive modernization of the power plant, the highly efficient combined cycle gas turbine (CCGT) plant was constructed. This supplies the power plant with electricity (approximately 70% of the demand) and heat as well as space heating by means of cogeneration. The natural gas-fired power plant also supplies a large part of the district heating requirement for the nearby town.

The central components of the plant include feed water pumps, which supply water to the steam generators at the power plant. As the reliability and availability of the pump groups are essential for the operation of the power plant, the CCGT plant has a total of three of these pumps available. While two of them are in operation, one is held in reserve so that in the event of a breakdown, the downtime of the power plant is kept to a minimum.

These important components were due to undergo maintenance for the first time in autumn 2019. In the interest of operational safety, the plant wanted to avoid being without the back-up pump any longer than absolutely necessary and therefore a short lead time was of paramount importance. After careful consideration of the competitive bids, the contract was awarded to Sulzer, an industrial maintenance provider renowned for its expertise in the field of rotating machinery.

Efficient project management

The project included the maintenance of the whole pump group consisting of the centrifugal pump, its drive motor and the connecting variable-speed coupling that controls the pump speed. All three components are made by different manufacturers. While the motor was being inspected, the Sulzer service center in Neuss overhauled the pump. The variable-speed coupling was sent to the facility in Schkopau, which specializes in the maintenance of gears and couplings.

As part of the standard maintenance programme, the condition of all three components was assessed and wearing parts were replaced. In the case of the variable-speed coupling, one component had to be replaced on the drive side, while a magnetic particle test certified the integrity of the remaining parts.

Overcoming challenges successfully

“Even the individual measures from the standard maintenance programme require the expert organization and coordination of logistics, capacities and resources”, says Andreas Holzaht, Sales Engineer at the Neuss Service Center. “What’s more, Sulzer’s extensive network of facilities means that we are able to offer a turnkey solution to match the customer’s schedule.”

In this case, due to entrained dirt particles and air bubbles in the water, the pump is exposed to higher loads than the other components. The inspection made after dismantling and cleaning during the assessment found a shaft heavily damaged by scoring and a destroyed impeller. Sulzer completed the reconstruction of the shaft and the replacement impeller was obtained from the original equipment manufacturer (OEM), enabling the rest of the overhaul to continue without interruption.

Necessary resources provided

The remaining repairs could be carried out as required at the service center. These activities were performed by the in-house mechanical production facility and included reworking the wear rings, producing new gauge rings for connection to these with an interference fit, producing a new throttling bush and reworking an impeller hub.

The project was completed on time in around two months and the maintenance of the second pump is scheduled to take place this year. “The customer was extremely satisfied with the handling of the project and found Sulzer to be a reliable partner”, says Holzaht. “When the time comes, the second of the three pumps due for maintenance will also be swiftly overhauled to guarantee continued operational safety at the power plant and thus a reliable supply of electricity for the plant as well as district heating.”

 

Image 1: The overhauled pump was reinstalled by Sulzer’s field service engineers

Image 2: The drive motor was placed in a transport rack during the project

Image 3: The boiler feed pump was disconnected and removed by Sulzer

Image 4: The complete pump unit was in a confined space

Image 5: The feed pump was transported to the service center on a maintenance frame


About Sulzer:

Sulzer is a global leader in fluid engineering. We specialize in pumping, agitation, mixing, separation and application technologies for fluids of all types. Our customers benefit from our commitment to innovation, performance and quality and from our responsive network of 180 world-class production facilities and service centers across the globe. Sulzer has been headquartered in Winterthur, Switzerland, since 1834. In 2021, our 13’800 employees delivered revenues of CHF 3.2 billion. Our shares are traded on the SIX Swiss Exchange (SIX: SUN). www.sulzer.com

The Flow Equipment division specializes in pumping solutions specifically engineered for the processes of our customers. We provide pumps, agitators, compressors, grinders, screens and filters developed through intensive research and development in fluid dynamics and advanced materials. We are a market leader in pumping solutions for water, oil and gas, power, chemicals and most industrial segments.

www.sulzer.com


Editorial Contact: Admin

Tel: +44 (0)1905 917477

Web: www.dmaeuropa.com

Email: [email protected]

Address: Progress House, Midland Road, Worcester, Worcestershire, WR5 1AQ, United Kingdom

Reader Contact:

Sulzer Global: Troy Rodger, Sulzer Management Ltd

Web: https://www.sulzer.com

Email: [email protected]

Address: Sulzer Management Ltd, Neuwiesenstrasse 15, 8401 Winterthur, Switzerland